Group Photo


 

Comments

Post a Comment

Popular posts from this blog

Week 1

Image
Before Attending the lab session on Friday 03/02/2023: On Wednesday, Feb the first, 2023 we managed to have a group meeting with our supervisor. We discussed the main tasks and aims for week 1 of the lab session.  The main tasks for week 1 were:  1- Checking that all the components arrived sucssefuly 2- Checking Compatibility between components.   3- Drawing and Building the circuit.  4- Installing Arduino Libraries to test the codes. 5- Deciding the audio input for the circuit. Before Attending the advisor session we managed to select our roles in the following order:  1- Project Manager: Mohammad Almatrouk  2- Designer: Abdullateef Althweeni  3- Implementer/Developer: Abdullah Almutairi 4- Technical Writer: Mohammed Almethen  1- Checking that all the components arrived successfully We had a slight delay in our components but they managed to arrive before the lab day.  2- Checking Compatibility between components   Since...
Read more

Week 4

Image
Week 4 Aims:  - Finishing the second Idea successfully.  Week 4 Issues:  - Soldering the LEDs together.  In this final week, we managed to finish our second Idea successfully.  Here are some of the steps that we have done to finish the process:  Note: in week 3, we stated that the code was our primary concern. The problem was not in the coding, but rather in the circuit. It turns out that an oscilloscope must be connected to the clock generator for the Lights to respond to music. The oscilloscope probe was used to examine the clock generator's pins 0 and 1. The circuit was operating well and serving its intended function. A reason might be that the output of the Clock generator is defective due to soldering and the oscilloscope probes are fixing this issue.  Masterclock was configured for usage with the nin-default 25 MHz frequency. With output 0 frequency of 165 KHz and output 1 frequency of 104 KHz. Here are the steps that were done this we...
Read more